Post Offer Free
shiny(HK)Industrial Technology Limited.  

Gold Index: 1745

You are here: home  > Multi Cavity Double Injection Mould Hot Runner Point Gate
  • Multi Cavity Double Injection Mould Hot Runner Point Gate
  • Multi Cavity Double Injection Mould Hot Runner Point Gate
Enlarge Multi Cavity Double Injection Mould Hot Runner Point Gate

Multi Cavity Double Injection Mould Hot Runner Point Gate 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: SY-13088


 
 
<span st

 

 

Multi Cavity Double Injection Mould Hot Runner Point Gate

 

 

Quick Detail:

 

1. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements

2. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.

3. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

4. Cavity material: S136 HRC48-52

5. Gate type: Hot runner to point gate

6. The part name: pipe fitting (double color injection mold)

7. Plastic material: PP+TPR


 

 

Description:

 

KO Pattern: 7”x7”,

Sprue Radius: SR 1/2"

Ejection type: ejection pin

Mold type: double color injection mold

The part name: pipe fitting

Part Material: PP+TPR

Locating ring Dimension: 3.99",

Mold construction description: Hot runner system, many sliders, double color injection mold, and Automatic thread demoulding device.

 

This part has very high appearance requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires of texture.

 

This mould is made in Shiny Mould Factory. It is a mould exported to USA, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.

 

Compared with traditional method of molding, advantages of two shot injection molding process are as follows:

1. The core material can use low viscosity materials to reduce injection pressure.

2. From the consideration of environmental protection, the core materials can use recycled materials.

3. According to the different use of characteristics, such as thick wall finished product cortex use soft material, the core material can use hard material or foamed plastic to reduce weight.

4. Low quality of core materials is helpful to reduce costs.

5. The cortex material or core material can use expensive material with special surface properties, such as material of EMI Shielding or high conductivity to increase product performance.

 

 

Specifications:

 

1.name

pipe fitting (double color injection mold)

2.Plastic material

PP+TPR

3.mould base material

S50C

4.cavity material

S136 HRC48-52, H13, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc

5.mold life

1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

6.cavity number

2

7.runner

Hot runner

8.gate type

POINT GATE

9.mould weight

420 kg

10. mould base standard

LKM Local standard, DME or HASCO,Customize according to customers' requirements
bigPhoto
 Mr. Jim Lee

Tel: 86-769-85355698
Contact to this supplier

Related Search

Multi Cavity Mould    Hot Runner Mould    Hot Runner    Double Injection Mould    Cavity Mould    Runner Mould    More>>

Find more related products in following catalogs on Hisupplier.com

Machinery & Industrial Supplies >> Precision Parts

Company Info

shiny(HK)Industrial Technology Limited. [China (Mainland)]


Business Type:Manufacturer
City: Dongguan
Province/State: Guangdong
Country/Region: China (Mainland)

View Contact Details

You May Like:

Product (34)